We'll take care of the clean-up.

Yes. The Washer is provided with TurboWash Powder (PB146N) as standard issue and unless your business has specific requirements, there is no further charge. In addition, all servicing and fair wear & tear repairs are included in your rental.

Typically, No! Provided that you have not added additional chemical after the technician has serviced the machine and parts are removed from the washer and allowed to dry in a well ventilated area, residue is typically not a problem.

If service cycles have been extended too long for your particular application, then you may end up with some dirty residue on your parts. If excessive chemical has been used, it is also possible to get a light white powdery residue left on parts as they dry, however this is easily rinsed away. If you are getting any residue, please advise PartWashers so that we can investigate the cause and help correct it.

The chemical used is infused with rust inhibitor which serves two purposes. It helps condition the inside of the washer which is mild steel and it also helps prevent surface rust on your parts. For it to work, it is imperative that parts are removed from the washer whilst they are still hot so that the latent heat aids in the 'flash' drying of the parts. Where parts are left to cool inside the washer, condensation will occur and may result in surface rust on your parts. If managed properly, rust is seldom an issue. The fact that there are mild steel washers that are over 20 years old and still in service is testimony to the fact that the rust inhibitor works.

Almost anything that fits inside the machine provided that it is compatible with the detergent being used and can withstand 80C temperatures. As an example, mechanics will often use the washer to clean their own tools at the end of the working week. Given the high pressure spray that is used, small parts should however, be placed inside a basket to prevent them being washed into the sump. We have seen machines used to clean items such as rock climbing 'holds' through to heavy machinery parts used in excavation. If it can be cleaned using a hand held pressure washer, it can probably be cleaned in one of our machines with far less effort.

No, you can leave it switched on. Other than the SW0800 (PW2), all machines come with a 24/7 timer which controls the heating elements. They are factory set to start at 0630hrs and switch off at 1430hrs Mon-Fri, but they can be programmed to match customer's individual requirements. They can also be manually overridden if required and they will automatically revert to the original timing settings once the next on/off trigger is reached.

That obviously depends on factors such as whether it has been properly serviced, the chemicals used and what has been washed in the machine (with resulting residue). There are plenty of examples where machines are still working effectively with over 20 years of service and minimal repairs. They key is to ensure that the unit is regularly serviced and cleaned and PartWashers are happy to assist you in that regard.

This answer depends. For a machine operated on a single shift basis, 5 days per week, typical service periods are 4 weeks. This can sometimes by extended by adding additional chemicals mid maintenance cycle, but that will depend upon saturation levels and the types of parts being washed. Extending wash cycles too far can result in equipment damage and can prove to be a false economy and thus cost you more whilst delivering an inferior clean. The longest service cycle offered by PartWashers is 3 months, after which there is a risk of the water becoming stagnant. Rental units are normally offered on a 4 weekly schedule with some lower duty cycle customers being on an 8 weekly servicing cycle.

Provided that you own the machine, ABSOLUTELY! However you need to be aware that there are stringent requirements set by the EPA with respect to how you deal with the waste wash-water which should never be simply flushed down the drain. Intentionally (or unintentionally) polluting our environment is managed via the Environment Protection Act 2017 and may result in severe penalties if you are found to be in breach of the Act. There are also other maintenance checks completed on the machine to ensure that the elements, pump are operating in accordance with set parameters, interlocks, RCD and that the drive gear is all operating safely. That said, these can all be carried out by a trained and competent person.

There are obviously a number of variables that will effect price, however rotary washers start with a RRP of $17,980 (as at 2024) with a service for a customer owned machine starting from $390. We can also provide rentals which includes the machine rental plus a full service schedule. This works out as a very cost effective option for most customers. There may be nuances related to your business that could influence those prices up or down, so the best option is to obtain an obligation free quote. If still unsure, we may be able to either wash a couple of typical parts for you or possibly place a machine at your site as part of a trial (subject to availability).